This is the BAMA archive. These manuals are available for download and free of charge. Do not be tricked into paying for a manual that is available here for free.
-
2026-10-09
- 170 new manuals added in aes, alinco, bitsavers, b&k, century, collins, dovetron, ebooks, eico, electric-eye, freq-electronics, goodwill, hickok, johnson, kantronics, micronta, military, national, rca, scientific_radio, sencore, sylvania, tennelec, triplett, uniden, and xyz.
-
2026-10-21
- New beta site for public review.
dxp-38
Error Codes
RX -- Boot block error detected TX -- LOD binary image error detected ERROR -- S28 binary image error detected LINK -- DSP programming error detected Since you see the TX LED flashing, it could signal a corrupted LOD image, however you should still see the @ on the serial port. Of course, if the boot block code itself is trashed, the flashing LED pattern could be meaningless. J11 can be used to start the built-in DXP38 hardware test routines. First short together the two pins at the '1' end of J11, then turn the DXP ON. The short only needs to be present during power up. This should start the internal test routines, and the front panel LEDs should not flash. With PuTTY (9600 8N1) connected to the serial port, the [Enter] key should display the test routine options.
Files
Contact and submissions
If you have a better copy of any of these manuals, or a manual which is not listed, and wish to share it, upload it to cloud.edebris.com or email the archive directly. All formats are accepted.
BAMA is offered as a free service to the internet community. Please respect the archive and its download limits.
Viewers
These viewers may be required to read some manuals in the archive:
- Sumatra PDF (Windows)
- DjView (DjVu)
- WinDjView (Windows, DjVu)
- Adobe Acrobat Reader (PDF)