This is the BAMA archive. These manuals are available for download and free of charge. Do not be tricked into paying for a manual that is available here for free.
-
2026-10-09
- 170 new manuals added in aes, alinco, bitsavers, b&k, century, collins, dovetron, ebooks, eico, electric-eye, freq-electronics, goodwill, hickok, johnson, kantronics, micronta, military, national, rca, scientific_radio, sencore, sylvania, tennelec, triplett, uniden, and xyz.
-
2026-10-21
- New beta site for public review.
sharp
Sharp Service Menu
Subject: Sharp Service Menu
Technical Connections June 25, 1996
===========================================
All our thanks go out to Ted Rosen has been so kind as to answer my question regarding the Sharp Tv Setup procedure. Here it is.
They do, indeed, have a service menu. *Temporarily* short tp2001 and
tp2002. They are located on resistor leads of two resistors located in the
left front or right front of the main pc board, depending on which model you
have. *Be careful not to short either tp to gnd!* Bad things will happen!
Now, once you've touched (for an instant) these tp's together, an
OSD will display:
S1 (xx)
Channel up and channel down will toggle thru S1, S2, S3, etc. Volume
up/down will vary each adjustment. I don't have the list of functions handy
at this moment, but I will venture to send them to you soon.
One very important adjustment is S8 (rf agc alignment). Your
customer complaint would be: has lines, snowiness, co-channel type
interference on some channels; others are OK (I've found CATV 22 and 23 to
be common indicators). Align S8 down until the noise goes away, then toss in
a few digits further down for good measure.
The service menu contains adjustments for color drives, vertical,
horiz, agc, aft, setup, etc. There's only 20 or so adjustments. The tuner is
not affected by the menu (unlike certain crappy service menu-ed TV's I could
name).
Pressing "Power" dumps the menu and the new service values are
automatically retained.
Ask and ye shall receive! Here's a list of the menu codes for Sharp
Tv's, what parameter they change, initial (standard) settings and overall
range of each alignment:
Service code Adjustment Initial value Range
S1 Sub-picture 80 0-127
S2 Sub-tint 64 0-127
S3 Sub-color 45 0-127
S4 Sub-brite 64 0-127
S5 Sharpness 32 0-64
S6 Vertical phase 0 0-7
S7 Horiz position 20 0-31
S8 Rf AGC 32 0-63
S9 Vertical size 32 0-63
S10 VCO 45 0-127
S11 R cutoff 0 0-255
S12 G cutoff 0 0-255
S13 B cutoff 0 0-255
S14 G gain 128 0-255
S15 B gain 128 0-255
S16 Trap (3.58 MHz) 0 *default* 0-1
S17 BPF 1 " 0-1
S18 Blanking 0 " 0-1
S19 Y-mute/vert collapse 0 " 0-1
S20 Horiz. AFC 1 " 0-1
S21 White peak limiter 1 " 0-1
S22 60 Hz 0 " 0-1
S23 Volume 26 8-58
S24 Audio balance 32 0-63
S25 Caption position 7 0-15
Enjoy!
Contact and submissions
If you have a better copy of any of these manuals, or a manual which is not listed, and wish to share it, upload it to cloud.edebris.com or email the archive directly. All formats are accepted.
BAMA is offered as a free service to the internet community. Please respect the archive and its download limits.
Viewers
These viewers may be required to read some manuals in the archive:
- Sumatra PDF (Windows)
- DjView (DjVu)
- WinDjView (Windows, DjVu)
- Adobe Acrobat Reader (PDF)